Monday, March 10, 2014

Looking Back

Our STI on the day it left
After my last "Everything Must Go!" post, I did sell the car.  I was reminded today that I did not make a final post on this blog to sum everything up.

I did very much enjoy my time owning and driving the STI.  The GR chassis hatchback is a nice size, and the layout is roomy and practical to live with.  It's not exactly a beautiful car, but after modifications (bigger wheels, a little bit of lowering, coloring the tail lamps, and some other details) I think it looked tough and at least purposeful.

Once we upgraded the turbo, the power was more than ample.  Honestly, it was more than I could use in normal daily driving.  Holding the gas pedal down for more than a few seconds felt like tempting fate and inviting arrest.  Don't get me wrong, I love horsepower.  I probably should have taken it out to the track to really explore the car's performance capabilities.

The handling was excellent, and the ride was compliant (despite the low-profile 19" tires) thanks to the adjustable Cusco dampers.

A few posts back I talked about cracking pistons on 2008 model year cars, and mentioned that our car had not suffered this fate.  Well...now it has.  Our car left us with a little over 8,000 miles.  By 13,000, it had a cracked piston that led to rod bearing failure, and required the replacement of the short block.  We did that repair and when we last saw the car it had headed out to the west coast, running fine.  I guess I'd suggest that if you are in the market for a used 2008 STI car, at least be prepared for the possibility of engine trouble.  Most of the cars on the road by now have far more miles than ours did, so any problems that were going to crop up have probably already happened.

The reason for selling the STI was so we could get a Subaru BRZ, which we did acquire, and promptly started modifying.  You can follow that car's progress on its own blog.

That's probably going to be it for this blog, barring news or updates from the car's current/future owners.  If you do own the car, feel free to drop us a note with photos.  Tell us about your adventures and how the car is doing.

Monday, August 13, 2012

Reduced! Come and get it!

The STI is still taking up space in the Mach V showroom, so I have dropped the price by $3,000.  $34,000 takes it away.  That's so low, it's almost like stealing!

Seriously.  It's an amazing value for anyone who was planning to buy an STI and then modify it.

Monday, May 21, 2012

Selling the STI



Well, all things must come to an end, and although I love this car, the new Subaru BRZ is coming out and we've got one on order.  That means we have to make some garage space, so the STI has to go.

It's got 8000 miles on it.

Kelly Blue Book on the car is $32,000.  We've added $20,000 in parts and modifications.  (The wheels alone cost more than $2500.)  We're looking for $37,000 for the car, as is with all the mods.  The title is in hand and it's never been in any kind of accident.

Here's the list of modifications:

Rays G-Games wheels  $2,800.00
Cusco Zero-2E coilovers    $2,640.00
Cusco E-con    $579.00
Whiteline front sway bar    $188.00
Whiteline rear sway bar    $212.00
Whiteline Anti-Lift Kit    $143.00
Whiteline Lower Control Arm Support Braces    $102.00
Whiteline steering rack bushings    $68.00
Whiteline rear diff mount insert bushings    $38.00
Kartboy end links front    $115.00
Kartboy end links rear    $125.00
TurboXS turbo-back exhaust with cat    $1,049.00
TurboXS intake    $219.00
TurboXS FMIC    $1,169.00
Cusco front strut bar    $190.00
SMY Cluster Maker gauge bezel    $150.00
Prosport Halo boost gauge    $95.00
Prosport Halo wideband air/fuel gauge    $250.00
Mach V boost control solenoid    $79.00
Blouch 20G-XT turbo    $1,399.00
Deatschwerks 850cc fuel injectors    $549.00
Seibon CF hood    $839.00
Custom paint for CF hood    $450.00
Rear exhaust garnishes    $179.95
Custom-painted tail lamps    $300.00
Custom-painted grill    $150.00
Dual-color LED turn signals    $69.00
LED tail lamps    $50.00
LED interior lamps    $129.00
HID fog lamps    $189.00
ProTune    $500.00
Cobb AccessPort    $595.00
ClearBra    $800.00
Labor    $3,500.00
   
Total    $19,909.95

If you're interested, give us a call at the shop at (571) 434-8333.

Tuesday, August 16, 2011

Another gauge mounting option


For a long time we've had requests from customers for an instrument bezel gauge mount.  We've had that for the older GD chassis cars for a long time, but didn't have one for the GR...until now.  Our friends at SMY Cluster Maker labored long and hard to make a gauge mount that fits and looks like a stock part.

The mount is textured just like the stock dash, and the finish is a flat dark gray that is a near-perfect match.  If you weren't looking for the mount, you'd never know it wasn't a factory part.  It fits two 52mm gauges.  There's a good amount of mounting depth, but it's not infinite, so the very longest of gauges might not fit.  The Prosport Halo gauges we had in our car fit fine, though.

Installation is pretty easy.  The factory instrument binnacle removes without using tools.  You do have to give it a good sharp tug to disengage it from the clips that hold it in, but it won't break.  The new bezel just clips in -- again, no tools required.

With the new instrument bezel gauge mount in place, we can see how well the Prosport Halo series gauges match the factory red lighting.  Note that for the sake of a clear view (as well as symmetry), we mounted the touch pad for the left-hand gauge on the lower left side of the gauge, meaning the touch pad is now upside-down.  We figured that's a minor price to pay for not having it sticking out into the instrument panel.

When combined with our windshield mount gauge pod, you've got a total of four possible gauges you could mount in any of the GR chassis cars.  (GR chassis includes 2008+ Impreza, WRX and STI.)  We actually did install four gauges in a customer STI recently.  Stay tuned for photos or videos of that car.

Wednesday, February 9, 2011

Out with the squish!

Removing stock steering rack bushings
We replaced several factory squishy rubber suspension bits on our STI with firmer polyurethane versions from Whiteline.  On the menu this week were the rear differential mount inserts, front lower control arm bushings, the Whiteline Anti-Lift Kit, and the a set of steering rack bushings.  The idea of all these parts is to take out slop and squish from the system, resulting in more precise location of the suspension components so they can do their job more directly and without deflection.  The factory rubber stuff is soft and comfortable, but as I've complained about in early blog posts, the 2008+ STI feels a lot more vague in its steering feel than previous-generation cars.  I wanted some of that feel back.

 Note that the 2011 STI did get revised, slightly firmer rubber bushings at the front and rear control arms. These Whiteline parts will be firmer still, but the difference from stock on the 2011+ cars will not be as dramatic as on the 2008-10 cars.

Pointing to the stock rear diff carrier bushings
Our shop guys report that installing all these parts was very easy.  The steering rack bushings come with a cylindrical tool that makes pulling out the old bushings very simple.  The rear diff bushing inserts just push into the voids in the existing rubber bushings -- we spritz the rubber with glass cleaner to provide a bit of lubrication.  The two sets of front control arm bushings (the Anti-Lift Kit goes on the back of the control arms, and the control arm bushing set goes on the front) install easily, too.

Once the car was back on the ground, I took it out on the road to see if I could tell the difference.  The effect on the steering was immediate -- between the control arm bushings and the steering rack bushings, it feels like the steering from a different car.  There's much more immediacy in the reactions of the front end.  Twitch the wheel, and the nose of the car twitches.  Go over a ripple in the pavement, and you can feel it in the steering wheel.  I love the increase in precision -- I feel like I can place the nose of the car very exactly in a corner.

Pressing in the Whiteline rear diff bushing inserts
The rear diff bushings were not as easy to feel at the beginning.  Once I started driving the car hard, though, I could tell things were firmer.  There is less "bounce" from the rear under hard one-two gear shifts, and on-off throttle transitions produce less wiggling of the rear end of the car.  It's hard to describe this, because I didn't really notice it before, I just perceive the lack of it.  Getting on and off the gas when the car is loaded up in a corner, it seems to stay planted better than it used to.

I can't say there's no effect on comfort from these modifications.  The increased feel in the front end is also accompanied by more small bumps and impacts transmitted into the car.  The stiffer diff mounting is noticeable when the car goes over expansion strips or other quick, small impacts, and in the form of some additional drivetrain vibration and noise in the rear of the car.  (You probably won't notice this from the driver's seat, but rear seat passengers might.)  The car isn't uncomfortable to me at all, but it's firmer and not as plush-riding as the OEM bushings were.

Overall I'm quite happy with the changes.  The steering feel, in particular, is worlds better than it was before.  The whole car just feels more secure and planted because of the more direct connection to the road.

Wednesday, December 22, 2010

End of year update

We've been doing some more tinkering on the STI since my last update.  We've got a new gauge mounting solution for the car, and some suspension goodies.

As I've talked about before in this space, the STI is a tough car to put gauges in.  The top of the dash is all one curvy piece, and there's no separate removable clock pod on top like in the pre-2008 cars.  We did develop the windshield pod that you saw in earlier posts, but that's not for everyone.

I contacted our friends at Craven Speed with our problem, and we went back and forth with some design ideas for sitting gauges on top of the steering wheel cover.  In the end, Craven came up with a simple universal gauge pod that will bolt on to almost anything, and will mount a gauge the way I had in mind.

The pod is made from CNC-machined aluminum, and is very sturdy.  The little foot bolts into place from the back side, so it's perfect for the top half of the steering column cover.  (It would not be so perfect for the top of the middle of the dash, though, since it would be difficult to access the underside to insert the bolts.)  Despite the smallness of the base, it's quite sturdy, and I'm not worried about the gauge vibrating or moving around.

There's a 52mm version and a 60mm version of the pod.  52mm is more than large enough if it's going to be on the steering column.  You might want a larger gauge if it's going to be farther away.

I just put a random EGT gauge in for this mockup -- I don't actually want more gauges in the car at this time, so this is just a temporary setup for purposes of photographing the product.

Craven Speed gauge pod -- click me!

On the bottom side of the car, we're going to be installing some additional suspension parts courtesy of Whiteline.  These include stiffer bushings for the rear differential subframe, bushings for the front control arms, a roll center adjustment kit, and maybe one or two more items.  I hope to have some photos of those, along with some feedback about the handling, in my next blog post.

Monday, October 11, 2010

Boost and Wideband Gauges Installed

One of my personal peeves is that turbo cars should all come with turbo boost gauges.  I'm surprised I let our STI go without one for so long.  But this past week we finally remedied that situation (thanks, Mach V shop staff!), and we got a new Prosport Halo boost gauge and wideband air/fuel meter in the car.  As you've probably seen from previous posts, we like the windshield mount pod, and chose that for our car.  It keeps the gauges off the dash, which really doesn't have a lot of room, and the pod is nicely concealed from outside the car.

I made a video showing all the features of the gauges.



I'm just happy to be able to see what boost pressure the car is running without having to hook up a laptop or AccessPort to see it.  Want to have gauges just like this?  Buy 'em from our web site.  You'll thank me later.

Tuesday, September 7, 2010

Tuesday, August 31, 2010

300% More Exhaust Tips!

Our friends at TurboXS haven't had a specific exhaust for the STI before now, so we initially installed the single-tip system indented for the WRX hatchback.  That fit fine, sounded great, and was nice and light, but especially after we fitted up the STI accessory rear garnish bits, it always seemed like the car was missing something over on the left side of the rear valence.

That's remedied now with a new TurboXS rear exhaust section with four very nice polished stainless steel tips.  The new rear section actually bolted right to the rest of our existing TurboXS exhaust, so if you are in the same boat as us and previously bought a single-outlet TurboXS turbo-back, you will be able to just purchase the rear section to get the new multi-tip style.

I thought the sound would be a lot quieter than the single-tip system (after all, the muffler looks about three times as big), but it sounds very similar to the old system.  It might be a tiny bit deeper in tone, but the volume level didn't seem to change.  The look is great.  Some systems for the STI have a pronounced "drain pipe" that hangs down just before entering the muffler, but the TurboXS system tucks nice and close up to the body.

The new quad-tip TurboXS system for STI hatchbacks will be available for purchase on our web site in the near future.

Thursday, August 26, 2010

Rota D-Force Wheels for STI

D-Force test-fit on STI
If you follow this blog you've probably seen me complain that there aren't many wheels available that are both wide and high-offset to fit the GR-chassis STI.  Although there ARE lots of 5x114 wheels around, most of them have the wrong offset -- typically around +35mm -- and would stick out on the WRX STI.


In an effort to remedy this situation we worked with Rota to spec out a wheel that would be nice and wide, but still fit under the fenders of the wide-body STI.  We just got them the other day.  They're called D-Force, and they're 18x9.5", +40.  They have a very large (2.75") lip, which is really unusual for wheels that fit the big Brembo brakes of the STI.  At 22.6 pounds, the weight isn't too bad, either.

D-Force
For now, we only have this wheel in flat black.  Other colors to come will certainly include "Hyper Black," which is a smokey silver color.  I'm open to suggestions on what other colors you'd like to see.  Also, we could do the wheel with a polished and clear-coated lip.  Comment at the bottom of this post if you have an opinion either way.

Want them?  As I write this post, they are in stock and you can buy them.  You can find them at our web site.

Sunday, July 25, 2010

GT Performance dyno video

This is the video from the second tuning session with the GT Performance race car.  With boost peaking at about 22 psi, tapering to 20 psi, the car made 565 horsepower at the wheels.  It's running 100 octane fuel.













Video here: http://www.youtube.com/watch?v=PhoMgVCjKuY

Saturday, July 24, 2010

Tuning an STI to higher horsepower levels

We had the opportunity recently to tune a beautifully prepared 2006 WRX STI that was put together by GT Performance in Maryland.  Among other goodies, the car sports a fully-built 2.6-liter block with custom dry-sump oiling, a built-up dog-gear transmission, a complete roll cage, and even air jacks.  A Garrett GT35R turbocharger pushes air into a Cosworth intake manifold, and through Cosworth heads.  The car made a whopping 565 whp on our dyno.  Here's a look at an earlier dyno run -- a mere 500 whp:


Here's the car on the track at Summit Point:


We look forward to working with the GT Performance crew some more in the near future.

Thursday, April 22, 2010

Driving the Mach V STI

I took the Mach V STI home and ran a few errands.  Hauled a big PC to work, took the kid to school.  The car is still its usual self for around-town driving.  The exhaust note might be a tiny bit louder at idle and low speeds, but it's hard to tell.

Full throttle is another story.  When the 20G-XT-equipped STI gets up above 3500 rpm, everything starts to happen really fast, and it sings a baritone Subaru full-throttle song that turns heads -- in a good way if those listening are car fans.  (I got a thumbs-up from a guy in a BMW Z3 M roadster.)  But maybe that noise is not so good if you're trying to keep a low profile on the road.  Not like the car in its current form is subtle -- what with the multi-vented hood, huge wheels, and all that.

The power is pretty fun.  At freeway speeds you can still dip into the gas in sixth gear and get a good dose of passing speed, although there is more lag than there used to be.  Dropping a gear gets the car up into insta-boost range and you'll quickly be at extra-legal speeds.

Which brings me back to the thought of losing my driver's license.  I'm going to have to get the car to the track to see what it's like to drive it really hard at this power level.

Tuesday, April 13, 2010

Blouch 20G-XT on the car

We bolted the new Blouch 20G-XT turbocharger to our STI, and rolled it back onto the dyno for some more pulls.  The turbo delivered as advertised.  Spool was a little slower than the Tomei ARMS turbo we had on the car before, which is understandable given how much larger the turbine outlet is on the 20G-XT.  The car made a lot more horsepower at the same boost levels -- 33 more hp and 30 lb-ft of additional torque to the wheels.  An added benefit that isn't seen on the dyno graphs is that off-boost throttle response is better -- the more wide-open turbo outlet probably is the reason.  The exhaust note is a bit louder now, too!

Most of the time when we put a 20G on a car we've also done a turbo induction hose, TGV deletes, and headers, none of which are on our car.  When we do get those mods done, we'll dyno again.  I'd expect another 10+ hp at that time.

Friday, April 2, 2010

Needs More Turbo

Although the Tomei ARMS turbocharger on our STI made decent power, and spooled very nicely compared to the stock hair dryer, we just can't leave well enough alone.  We asked our friends at Blouch Turbo if they had any suggestions for something with just a little more oomph, and we got a Blouch 20G-XT: A Mitsubishi 20G compressor housing and center section mated to a custom Blouch turbine side that will bolt on to any 2002-07 WRX, and any 2002+ WRX STI.  But wait, there's more.  The compressor wheel is not cast like traditional wheels.  Instead it's CNC milled from a block of billet aluminum.  That means it can be made lighter and more efficient than old-school compressor wheels.  The upshot is supposed to be more power and better spool.  We'll find out next week when we bolt the turbo on and roll the car back on the dyno.

The 20G turbo has always been my "go-to" turbo for 2.5-liter cars.  It spools almost like a stock turbo, but has massively more top-end.  If you have a 2.0-liter car, the 18G is probably a better choice, as the 20G takes a while to get going with only a 2.0 engine blowing on it.  Blouch also has an 18G-XT available.  Watch our web site for more details on purchasing these turbos soon.

Tuesday, March 23, 2010

Trickle-Down Economics, Subaru Style

Today Subaru announced that the 2011 WRX sedan will get a wide body look that borrows the front fenders of the current STI hatchback.  The car will be on display at the up-coming New York Auto Show.

What does this mean?  Well, besides the obvious benefit of a 1.5"-wider track for WRX sedan buyers (the car also gets a more aggressive front end, blacked-out grille, and wider 17 x 8" wheels), it seems to me that it would be easy and cheap to just make an STI sedan, now that the body work is taken care of.  Our customers have pined for the lack of an STI sedan since the old one retired back in 2007.  I hope they haven't been holding their collective breath since then, but I'd wager there will be a 2011 STI sedan available alongside the hatch.

We've been working with our suppliers to get larger and wider wheels available for the current WRX STI -- now we'll renew those efforts, since the wider WRX will also allow for those bigger fitments.  (We've seen STI hatch models run wheels as wide as 10".)

Wednesday, February 10, 2010

Tokyo Auto Salon 2010

It's been extremely snowy here at Mach V HQ, so I haven't had the STI out much in the last few weeks.  (I know, it's AWD, but it's also pretty low.)  I did get over to Tokyo for the Tokyo Auto Salon, though.  Here are some of the STIs I saw there.

















The silver car above was Subaru's car for the 24 Hours of Nürburgring race.  It's got a 2.0 liter engine with 320 hp, upgraded suspension, fat wheels and slick tires, roll cage, race seats, and other goodies.

















Subaru's new R205 special edition STI has special lightweight wheels, six-pot front brakes, special suspension, and 316 hp.


 
The black car had aftermarket exhaust, carbon hood, and new Yokohama Advan RS-D (deep lip!) wheels.  19x9", I think.


 
This one was from Prodrive Japan.  It's got a carbon hood, front bumper, side skirts, and rear wing from Varis.

I've got a few more STI pics that I'll upload later.

Sunday, December 27, 2009

Pure Carbonium

We have a new 3M carbon fiber-look wrap material that we're selling. It's not really carbon fiber, but it looks very convincing. Unlike carbon fiber, it bends around tight corners and, with the application of a little heat, can stretch and cover convoluted surfaces. It's self-adhesive and pretty easy to apply. (There are other carbon-look materials that are fabric-based and require spray adhesive to put on. This is a lot easier.)

I took a couple of hours and applied the material to the dash of our WRX STI. For an amateur, I think I did a pretty decent job. I popped the silver dash inserts free of the dash, and wrapped them each in the carbon-look material.  I trimmed out the vent openings so the "open" and "closed" indicators show. I also removed and wrapped the steering wheel button inserts to match. Tools used: Heat gun (a hair dryer would do), Exacto knife.

Subaru makes a "carbon look" dash kit for the older WRX cars, although they don't make one for the current generation. I think this is far more convincing than any previous faux carbon I've seen.

Several customers have asked me about doing the roof of the car in this. It won't last forever (3M says 3-4 years in exterior application, and that's in a vertical mounting), but it should look pretty good. We can cut a large enough piece for that, too.

So far I've received mostly positive feedback about this particularly modification to the car, although a few have decried the fact that this is strictly cosmetic, and has no useful function. Well, that's true, but I'm in good company; I've seen similar dash treatments -- and this is factory-issue, not applied by the consumer -- on high-end Mercedes and BMW cars recently. What do you think, readers?

Friday, December 11, 2009

US Market Gets a Special Edition STI!

We're used to seeing the Japanese home-market special edition WRX STI models. There's been the S202, S203, S204, WRX STI Spec C, and even a WRX STI Spec C Type RA-R. All of those cars are factory hot rods, with all kinds of cool goodies like stiffer suspensions, different (usually larger) wheels and tires, better brakes, and more power. What do we ever get? Well...there was the "Limited" model that one year, that came with leather and a sunroof.

Perhaps there's been some kind of change in philosophy in Spring Hill, because Subaru has announced a special edition that sounds pretty good to me. Named (wait for it...) "WRX STI Special Edition," the car will gain some features and lose some. Gained: Revised suspension with stiffer front springs, stiffer rear shocks, stiffer rear subframe bushings, and a fatter rear sway bar; and special wheels from the Japan-market Spec C car that MUST be lighter than the 27-pound standard US wheels.

Lost: Six of the ten speakers, and five of the six CD slots in the stereo; HID headlamps; turn indicators on the side mirrors; auto climate control; and $2000 of price, bringing the MSRP down to $32,995 plus delivery fee.

The grumpy Subaru forum denizens didn't seem too thrilled about this car ("Give us the Spec C!"), but I like it. It's slightly lighter, I assume it handles better, and it's quite a bit cheaper. In fact, I'd like to see Subaru go FARTHER in this direction. I'd continue the de-contenting and remove the entire SI-Drive system, switch to 17" wheels and tires, and swap the spare tire for a can of flat-fixer. (I'm trying to think of what else you could remove, but I'm out of ideas.)

The other thing that would make a special edition car a little more special would be a few more horsepower. Call it ten more for a total of 315, and maybe 100 pounds off the standard car, getting the weight down to maybe 3150. Sounds like a fun ride to me.

Saturday, November 28, 2009

PLX Gauges and the STI Windshield Pod

The windshield pod we mentioned some time back is now in production and on the shelf. We put a couple of PLX DM-100 gauges in a customer car and they turned out great. We were pleased with the Mach V splash screen, but it's the rest of the programmable functions of the gauges that's the cool part. You can choose between about six different data display modes, each of which is customizable by color. (Note that I was still playing around with colors in the second picture, below.) You can also upload custom wallpaper or gauge styles for each gauge.

If you have more sensors than you have gauges, you can change what sensor is displayed on what gauge using the wired remote control. Or you can display four different data channels in text form on one gauge.

The gauges are just about 1" thick, so mounting is really easy. They'll fit in any standard gauge mount (which is what we did), or you can just surface mount them or put them on a simple stand or L-bracket. They come in 52mm and 60mm sizes.

Reconfigurable and programmable gauge displays are the future of gauge technology. Some of the latest cars have gauges like this -- the Lamborghini Reventon is one that I can think of. Recent airplanes have this approach, too, with LCD screens that display the appropriate data at the right time, rather than just fixed gauges that may or may not be useful all the time. As the technology gets less expensive, more and more original-equipment automotive gauge displays will eventually look like this. But for the time being, it's up to us in the aftermarket to lead the way.